Step 1
![Original](https://s3.amazonaws.com/craftfoxes-assets/steps/images/000/006/835/original.jpg?1436381297)
Magazines DecoArt Triple Thick Gloss Glaze Americana Acrylic Paints Chain necklace Large wood beads Jump rings Embroidery floss Cotton cord White glue and Super Glue Paintbrush Needle nose pliers
Step 2
![Original](https://s3.amazonaws.com/craftfoxes-assets/steps/images/000/006/836/original.jpg?1436381306)
FOR ALL 3 STYLES Cut the magazine pages into 2" wide strips Roll them at an angle to create long tubes Secure the end with white glue Wrap them around the tip of a pair of needle nose pliers *Add two or three tubes together to create larger disks
Step 3
![Original](https://s3.amazonaws.com/craftfoxes-assets/steps/images/000/006/837/original.jpg?1436381310)
FOR THE LAYERED DISK NECKLACE Paint the disks white and let them dry Mix Triple Thick Gloss Glaze with a some Americana paint to create a faux glaze Glaze the white disks Add crazy glue to each end of a 36" piece of cotton cord Fold the cord in half and then tie a knot about 12" from the looped end Thread the ends of the cord through opposite sides of the 1st disk Continue threading the ends through opposite sides on about 9 disks Tie a knot at the edge of the final disk Add a small disk at one and end tie a loop at the other for a closure
Step 4
![Original](https://s3.amazonaws.com/craftfoxes-assets/steps/images/000/006/838/original.jpg?1436381315)
FOR THE EMBROIDERY FLOSS NECKLACE Make about 20 disks in different sizes Paint them white and then glaze them with the tinted Triple Thick Gloss Glaze Thread a 1 yard piece of embroider floss through the center to create spokes Tie a knot when you're done and secure it with a dab of super glue Attach disks with jump rings to the chain
Step 5
![Original](https://s3.amazonaws.com/craftfoxes-assets/steps/images/000/006/839/original.jpg?1436381319)
FOR THE LARGE MEDALION Make a very large disk with about 10 paper tubes Make one long bead by rolling a 3" long piece of paper into a tube Paint everything black and let dry Add the foil glue to the end of the tube bead and in a design on the medallion Add the gold leafing with the foil tape when the glue is completely dry Cut a 36" piece of black cotton cord Tie a slip knot around the center of the straw Thread both ends through the center of the disk Tie a knot between the disk and the tube on both sides Voila!